Terasic Technologies Apollo S10 SoM Developer Kit

Terasic Technologies Apollo S10 SoM Developer Kit is designed for modular and scalable high-performance FPGA prototyping and HPC solutions. The included Apollo S10 SoM (System on Module), based on the Intel® Stratix® 10 SoC (System on Chip), offers speed, breakthrough computing power, and low power consumption. The Apollo S10 SoM also includes a number of high-end hardware interfaces such as high-capacity and high-bandwidth DDR4 SDRAM (up to 64GB), on-board USB-Blaster II, and FMC/FMC+ connectors for I/O expansion. The Apollo S10 Carrier Board included in the Developer Kit features two ultra-low-latency QSFP+ connectors for 40G Ethernet and Thunderbolt™ 3, enabling developers to evaluate the I/O planned for their systems, and build their custom systems around it.

Features

  • Apollo S10 SoM
    • FPGA - Intel Stratix 10 SoC FPGA (1SX280HU2F50E1VG)
    • FPGA configuration
      • On-board USB Blaster II for FPGA programming and debug
      • AS Mode configuration from QSPI Flash
    • Clock and user interface
      • Four 50MHz single-ended clock source
      • One 100MHz single-ended clock source
      • Clock generator Si5341
      • 2x LED, 2x button,  2x dip switch, CPU reset
      • Power switch
      • FMC voltage 1.8V/1.5V/1.2V selection
      • FMC+ voltage 1.8V/1.5V/1.2V selection
    • Memory
      • 1024Mbit QSPI Flash (EPCQL1024-compliant)
      • Total of 64GB DDR4 x72 2133MT/s with ECC
        • Two independent DDR4 banks
        • One bank shared with FPGA and HPS
    • Communication and expansion
      • FMC (Vita57.1) connector with 10 transceivers
      • FMC+(Vita57.4) connector with 24 transceivers
    • HPS
      • MicroSD slot
      • Gigabit Ethernet with RJ45
      • USB OTG with micro USB connector
      • UART to USB with mini USB connector
      • RTC
      • LED, button, cold reset button
      • 1x6 GPIO header
    • Dashboard system
      • Input power monitor
      • FPGA and board temperature monitor
      • Fan control and monitor
      • Auto fan speed
      • Auto shutdown
    • Power source
      • 12VDC from 2x4 PCIe connector
      • 12VDC from Samtec connector (reserved for carrier board)
  • Apollo Carrier Board
    • PCIe Gen3 x4 via Thunderbolt 3 (Type-C™ Connector)
    • USB downstream port via Thunderbolt 3 (Type-A Connector)
    • Two QSFP connectors (40G Ethernet)
    • Clock generator to provide reference clock for transceiver IP
    • 4x LED, 2x button, 2x switch
    • 2x20 GPIO expansion header

Applications

  • Prototyping
  • High-speed communications
  • Drive and motion control
  • Digital signal processing
  • AI and deep learning

Kit Contents

  • Apollo SoM Board and Carrier Board
  • Heatsink (installed)
  • MicroSD card (installed) and card reader
  • Mini USB cable
  • 12V/240W power supply
  • AC power cord
  • Quick start guide

Apollo S10 SoM Layout

Location Circuit - Terasic Technologies Apollo S10 SoM Developer Kit

Carrier Board Layout

Location Circuit - Terasic Technologies Apollo S10 SoM Developer Kit

Apollo S10 SoM Block Diagram

Block Diagram - Terasic Technologies Apollo S10 SoM Developer Kit

Carrier Board Block Diagram

Block Diagram - Terasic Technologies Apollo S10 SoM Developer Kit
게시일: 2020-04-27 | 갱신일: 2024-10-25