Littelfuse TPSMF4L 시리즈 표면 마운트 400W TVS 다이오드

Littelfuse TPSMF4L 시리즈 표면 마운트 400W TVS 다이오드는 낙뢰 및 기타 과도 전압 이벤트로 인해 유도되는 과도 전압으로부터 보호하는 기능을 제공합니다. 1.08mm의 낮은 프로파일 높이, 낮은 인덕턴스, 탁월한 클램핑 성능, AEC Q101 인증을 갖춘 TPSMF4L 시리즈의 이상적인 용도로는 높은 신뢰성을 요구하는 응용 기기, 차량용 애플리케이션 등이 있습니다.

특징

  • High reliability application and automotive grade
  • AEC Q101 qualified
  • 400W peak pulse power capability at 10/1000μs waveform, repetition rate (duty cycle): 0.01%
  • Compatible with industrial standard package SOD-123FL
  • Low profile: maximum height of 1.08mm.
  • Low inductance, excellent clamping capability
  • For surface mounted applications to optimize board space
  • Typical failure mode is short from over-specified voltage or current
  • Whisker test is conducted based on JEDEC JESD201A per its table 4a and 4c
  • IEC-61000-4-2 ESD 30kV(Air), 30kV (Contact)
  • ESD protection of data lines in accordance with IEC 61000-4-2
  • EFT protection of data lines in accordance with IEC 61000-4-4
  • Fast response time: typically less than 1.0ns from 0 Volts to VBR min
  • High temperature soldering: +260°C/40 seconds at terminals
  • Glass passivated junction
  • Built-in strain relief
  • Plastic package is flammability rated V-0 per Underwriters Laboratories
  • Meet MSL level1, per J-STD-020, LF maximum peak of 260°C
  • Matte tin lead–free plated
  • Halogen-free and RoHS compliant
  • Pb-free E3 means 2nd level interconnect is Pb-free and the terminal finish material is tin(Sn) (IPC/JEDEC J-STD-609A.01)

애플리케이션

  • Automotive electronic control units
  • Automotive Sensors
  • Automotive Entertainment systems
  • Portable devices that require high reliability
  • Hard drives
  • Notebooks
  • VCC busses
  • POS terminals
  • SSDs
  • Power supplies
  • Monitors
게시일: 2016-07-13 | 갱신일: 2022-03-11