JAE Electronics WP7 Board to Board Connectors

JAE WP7 Series features 0.4mm pitch Board to Board Connectors with a 0.7mm stacking height. This height is ideal for high-density mounting in slim information communication devices such as mobile phones, LCDs, notebook PCs, and PDAs. Design features include a contact structure that ensures high wear-resistance and high contact reliability, secure hold-downs to prevent insulator breakage and peeling from FPC, and a 2-point contact design to resist twisting stress. JAE offers the WP7 Series Board to Board Connectors with a high removal force for lower pin count versions and a lower insertion force for higher pin counts. The low and high pin count versions feature the same mounting pattern to meet different product function requirements.

Features

  • 0.4mm pitch, two rows, 0.7mm stacking height
  • Contact structure ensures high wear-resistance and high contact reliability
  • Secure hold-downs prevent insulator breakage and peeling from FPC
  •  
  • 2-point contact design to resist twisting stress
  • Pb-free with Ni barrier on contact that prevents solder wicking
  • High removal force for WP7A (low pin count: 10 - 30 positions)
  • Low insertion force for WP7B (high pin count 40 - 70 positions)
  • The mounting pattern for WP7A and WP7B is the same

Specifications

  • Cu alloy / Au plating (0.1µm min.) contact
  • Heat-resistant plastic insulator
  • Hold-down
    • Plug: Cu alloy / Au plating (0.1µm min.)
    • Receptacle: Cu alloy / Sn plating
  • No. of contacts
    • WP7A: 10, 16, 20, 26, 30
    • WP7B: 40, 50, 60, 70
  • 0.42mm, two rows pitch 
  • 40ºC to +85ºC operating temperature
  • 70mΩ max. (initial) contact resistance 
  • Life time (50 mating cycles)
  • DC 0.2A each per terminal rated current 
  • AC, DC 50V rated voltage 
  • 100MΩ max. (initial) insulation resistance 
  • AC250Vrms per minute dielectric withstanding voltage 
  • (WP7A) Total Insertion Force - 1.50N x n max. (n: No of pos.)
  • (WP7A) Total Removal Force - 1.50N x n max. (n: No of pos.)
  • (WP7B) Total Insertion Force - 1.00N x n max. (n: No of pos.)
  • (WP7B) Total Removal Force - 1.10N x n max. (n: No of pos.)
게시일: 2012-02-07 | 갱신일: 2022-03-11