Analog Devices Inc. EVAL-ADM3095E 평가 보드
Analog Devices EVAL-ADM3095EEBZ 인증 IEC EMC(전자기 호환성) RS-485 평가 보드는 레벨 4 IEC EMC 및 완벽한 ±42V 공급 장애 보호 기능을 갖춘 ADM3095E RS-485 송수신기 평가용으로 설계되었습니다. EVAL-ADM3095E 보드는 실험실 테스트를 통과했으며 인증을 받았습니다. EVAL-ADM3095E 보드는 GND에 연결된 RS-485 A 및 B 버스 핀을 통해 ±30kV를 초과하는 HBM(인체 모형) ESD 보호 기능을 제공한다는 점도 확인되었습니다. 더 나아가, EVAL-ADM3095E는 RS-485 A 및 B 버스 핀에서 최대 ±42V AC/DC 피크에 대한 고전압 결함에 견딜 수 있습니다.
The EVAL-ADM3095E evaluation boards from Analog Devices are designed for easy configuration through jumper connections. The jumper connections enable or disable the RS-485 driver and receiver. Two power supplies may be used to power the EVAL-ADM3095E. One power supply can be used for the VIO logic supply, and one VCC supply can be used for the RS-485 driver/receiver. When powering the board with one power supply, an on-board jumper connects the ADM3095E VIO and VCC pins. Test points are also included for all power and signal lines.
특징
- Level 4 IEC EMC certified RS-485 evaluation board
- Certified RS-485 A and B bus pin protection, passing
- IEC 61000-4-5 surge protection to ±4kV
- IEC 61000-4-4 EFT protection to ±2kV
- IEC 61000-4-2 ESD protection to
- ±8kV contact discharge
- ±15kV air gap discharge
- Certified IEC 61000-4-6 conducted RF immunity to Level 3 testing (10V/m rms)
- Passes RS-485 A and B bus pins HBM ESD to >±30kV
- Provides A and B bus pin fault protection to ±42V AC/DC peak
- Convenient connections for power supplies and signals through screw terminal blocks
- 1.62V to 5.5V operating voltage range on VIO logic supply
- 3V to 5.5V operating voltage range on VCC
- Easily configurable through jumper connections
- Test points for measuring all signals
Associated Transceivers
Analog Devices Inc. ADM3095E RS-485 송수신기
완전 통합형 EMC(전자기 호환성) 보호 RS-485 송수신기입니다.
게시일: 2017-06-02
| 갱신일: 2022-04-14