결과: 108
선택 이미지 부품 번호 제조업체 설명 데이터시트 구매 가능 정보 가격 (KRW) 수량에 따라 단가별로 테이블의 결과를 필터링합니다. 수량 RoHS
SparkFun SparkFun 액세서리 This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway headers.Dimensions: 4" lengthDocuments:D
60주문 중
최소: 1
배수: 1
DFRobot DFRobot 액세서리 Jumper Wire - 0.1"(housing pin not included) 재고 없음
최소: 1
배수: 1

DFRobot DFRobot 액세서리 Jumper Wires 7.8in F/M 10 Pack 재고 없음
최소: 1
배수: 1

Seeed Studio Seeed Studio 액세서리 4 pin dual-female jumper wire - 300mm (5 PCs pack) 재고 없음
최소: 1
배수: 1

SparkFun SparkFun 액세서리 This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end bare cable on the opposite end.Dimensions: 100mm lengthDocuments:JST connector 재고 없음
최소: 1
배수: 1

SparkFun SparkFun 액세서리 This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D 재고 없음
최소: 1
배수: 1

SparkFun SparkFun 액세서리 This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire it's better for higher current applications.Dimensions: 6" lengthDocuments:Datasheet 재고 없음
최소: 1
배수: 1
SparkFun SparkFun 액세서리 Jumper wires are awesome. Just a little bit of stranded core wire with a nice solid pin connector on either end. They have the flexibility of stranded wire but will fit directly into breadboards and female pin headers. These are 6 inch long 26 AWG j 재고 없음
최소: 1
배수: 1