Qwiic 연결 시스템

SparkFun Qwiic 연결 시스템은 I2C 센서, 액추에이터, 실드 및 케이블의 에코시스템으로, 프로토타이핑을 보다 빠르게 하고 오류가 적게 만듭니다. Qwiic Connect 시스템은 내부 집적 회로(I2C) 프로토콜을 사용합니다. I2C 프로토콜은 여러 개의 "슬레이브" 디지털 집적 회로가 단순한 두 개의 와이어로 하나 이상의 "마스터"칩과 통신할 수 있도록 하기 위한 것입니다. 

결과: 16
선택 이미지 부품 번호
 제조업체
설명 데이터시트 구매 가능 정보 가격 (KRW) 수량에 따라 단가별로 테이블의 결과를 필터링합니다.
수량 RoHS ECAD 모델 제품
타입
SparkFun SparkFun 액세서리 The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a calibrated and compensated pressure sensing range of 60mbar to 2.5bar easy to
데이터시트
60재고 상태
최소: 1
배수: 1
없음
Sensors
SparkFun SparkFun 액세서리 Qwiic JST Connector- SMD 4-pin
데이터시트
3,897재고 상태
MouseReel 사용가능
최소: 1
배수: 1
: 1,000

Connectors Tiny 4-Pin SMD Connector
SparkFun SparkFun 액세서리 Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in red LED simplifies all of those nasty worries away into an ea
데이터시트
19재고 상태
최소: 1
배수: 1
Optoelectronics Red LED
SparkFun SparkFun 액세서리 Buttons are an easy and tactile way to interface with your project but why would you want to deal with debouncing polling and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of those nasty worries away into an
데이터시트
20재고 상태
최소: 1
배수: 1

Qwiic Button with Green LEDs
SparkFun SparkFun 액세서리 SparkFun Qwiic Shield for Arduino 11재고 상태
22예상 2026-05-19
최소: 1
배수: 1

Shields Qwiic Connect System
SparkFun SparkFun 액세서리 The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device.The Qw 171재고 상태
430예상 2026-05-13
최소: 1
배수: 1

Adapters Qwiic Adapter
SparkFun SparkFun 액세서리 The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that when combined with the micro:bit provides you with a fully functional weather station. With the weather:bit you will have access to barometric pressure relative humi
데이터시트
1재고 상태
최소: 1
배수: 1
Carrier Boards Weather:bit
SparkFun SparkFun 액세서리 The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. The Qwiic shield connects the I2C bus (GND 3.3V SDA and SCL) on your Arduino Nano to four Spark
데이터시트
14재고 상태
최소: 1
배수: 1
Shields Qwiic Shield
SparkFun SparkFun 액세서리 Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. Th
데이터시트
60재고 상태
최소: 1
배수: 1
없음
Accessories Qwiic Single Relay
SparkFun SparkFun 액세서리 Keypads are very handy input devices but who wants to tie up seven GPIO pins wire up a handful of pull-up resistors and write firmware that wastes valuable processing time scanning the keys for inputs? The SparkFun Qwiic Keypad comes fully assembl 7재고 상태
11주문 중
최소: 1
배수: 1
없음
Accessories
SparkFun SparkFun 액세서리 The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started we've assembled this Qwiic Cable Kit for everyone. If you aren't sure which Qwiic cable to use this handy box includes all o
데이터시트
123재고 상태
최소: 1
배수: 1
없음
Cables Qwiic Cable Kit
SparkFun SparkFun 액세서리 Translating physical forces into digital data usually requires managing multiple components but the SparkFun Qwiic Scale simplifies the entire process. With the on-board NAU7802 this Qwiic breakout board acts as an all-in-one amplifier and Analog-t
데이터시트
55재고 상태
90예상 2026-05-19
최소: 1
배수: 1
없음
Breakout Boards Qwiic Scale
SparkFun SparkFun 액세서리 Buttons are an easy and tactile way to interface with your project but why deal with debouncing polling and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all those worries away into an easy-to-use I2C device. Utilizing
데이터시트
17재고 상태
최소: 1
배수: 1
Breakout Boards
SparkFun SparkFun 액세서리 The SparkFun Qwiic Shield for Thing Plus provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Thing Plus or Feather boards. Since the Thing Plus and Feather footprints are interchangable you can use this shield w
데이터시트
16재고 상태
최소: 1
배수: 1
Shields Qwiic Shield
SparkFun SparkFun 액세서리 This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view so not only can the AK9753 detec
데이터시트
N/A
최소: 1
배수: 1

Sensors Presence Sensor
SparkFun SparkFun 액세서리 This SparkFun Qwiic Pro Micro BoogieBoard was a limited edition version of the Qwiic Pro Micro. We are now out of stock and are not reproducing it. The SparkFun Qwiic Pro Micro BoogieBoard is a Special Edition version of the SparkFun Qwiic Pro Micro 재고 없음
최소: 1
배수: 1
없음
Qwiic Pro Micro BoogieBoards