ICE3PCS01G

Infineon Technologies
726-ICE3PCS01G
ICE3PCS01G

제조업체:

설명:
역률 보정 - PFC STANDALONE PFC CTRLR IN CCM

ECAD 모델:
무료 라이브러리 로더를 다운로드하여 이 파일을 ECAD 도구용으로 변환하십시오. ECAD 모델에 대해 자세히 알아보기

재고 상태: 3,848

재고:
3,848 즉시 배송 가능
공장 리드 타임:
13 주 표시된 것보다 많은 수량에 대한 추정 공장 생산 시간입니다.
최소: 1   배수: 1
단가:
₩-
합계:
₩-
예상 관세:
포장:
전체 릴(2500의 배수로 주문)

가격 (KRW)

수량 단가
합계
컷 테이프/MouseReel™
₩3,401.8 ₩3,402
₩2,190 ₩21,900
₩1,956.4 ₩48,910
₩1,606 ₩160,600
₩1,518.4 ₩379,600
₩1,328.6 ₩664,300
₩1,157.8 ₩1,157,800
전체 릴(2500의 배수로 주문)
₩1,052.7 ₩2,631,750
₩1,003 ₩7,522,500
† ₩8,000 MouseReel™ 수수료는 장바구니에 더해져 계산됩니다. 모든 MouseReel™ 주문은 취소 및 환불이 불가능합니다.

대체 포장

제조업체 부품 번호:
포장:
Reel, Cut Tape, MouseReel
구매 가능 정보:
재고 상태
가격:
₩2,132
최소:
1

제품 속성 속성 값 속성 선택
Infineon
제품 카테고리: 역률 보정 - PFC
RoHS:  
100 kHz
- 25 C
+ 125 C
SMD/SMT
DSO-14
Reel
Cut Tape
MouseReel
브랜드: Infineon Technologies
습도에 민감: Yes
제품: PFC Controllers
제품 유형: PFC - Power Factor Correction
시리즈: ICE3PCS01
팩토리 팩 수량: 2500
하위 범주: PMIC - Power Management ICs
부품번호 별칭: SP000639560 ICE3PCS1GXT ICE3PCS01GXUMA1
단위 중량: 460 mg
제품을 찾음:
유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
속성 선택됨: 0

이 기능을 활성화하려면 자바스크립트가 필요합니다.

KRHTS:
8542311000
CNHTS:
8542399000
CAHTS:
8542310000
USHTS:
8542310075
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

Switch Mode Power Supplies - High Power Topology

Infineon Technologies Switch Mode Power Supplies - High Power Topology is suitable for power applications above 400W. Following the front end stage of an AC/DC rectifier, a DC/DC power converter is required to step down the bus voltage and provide a galvanically isolated and tightly regulated DC output (12V, 24V, 48V). While a wide range of isolated topologies are available, the phase-shifted full-bridge converter is more suitable for higher power applications for reasons such as its inherent zero-voltage Switching for the primary side switches.

Switch Mode Power Supplies - PFC Boost CrCM / CCM

Infineon Technologies PFC Boost CrCM (Critical Conduction Mode) / CCM (Continuous Conduction Mode) helps shape the input current of the power supply to be in synchronization with the mains voltage, in order to maximize the real power drawn from the mains. CCM is the most popular topology used in PFC applications and is commonly used for medium/high power ranges (higher than 300W), for reasons such as lower current peaks and better line filtering in terms of cost and size. CrCM is more commonly used for low power (less than 300W) PFC applications. When active power factor correction is required, the boost converter is the most popular topology used in AC/DC applications, specifically in power supply products for servers, telecommunication, adapters, and more.

Switch Mode Power Supplies (SMPS)

Infineon Technologies Switch Mode Power Supplies (SMPS) are a cost-effective line that includes high voltage MOSFETs, control ICs, and Silicon Carbide diodes for PFC and PWM stages, as well as low voltage MOSFETs for synchronous rectification. With these SMPS products Infineon supports the trends towards continuously reducing power consumption. Especially versatile is the new CoolMOS™ 600V C6 family which combines good efficiency with attractive pricing, as does our 3rd generation SiC diodes. For synchronous rectification the OptiMOS™ 3 series offers extremely low on-state resistance and low capacitances. Infineon's new control ICs support topologies such as quasi-resonant flyback and LLC.