MIKROE-4965

Name: Mikroe MIKROE-4965
Brand: Mikroe
SKU: 932-MIKROE-4965
Price: 43800 KRW
Availability: OutOfStock

이미지는 참조용으로만 사용하십시오
제품 사양을 참조하세요

Mouser 번호:

932-MIKROE-4965

제조업체 번호:

MIKROE-4965

제조업체:

Mikroe

설명:

LED 조명 개발 툴 LED Driver 13 Click

추가 정보

Mikroe MIKROE-4965에 대해 자세히 알아보십시오.

구매 가능 정보

재고:: 재고 없음

예기치 않은 오류가 발생했습니다. 나중에 다시 시도하십시오.
공장 리드 타임:: 배송 견적 요청

수량 입력:

최소: 1 배수: 1

단가:

₩-

합계:

₩-

예상 관세:

가격 (KRW)

수량	단가	합계
	₩43,800	₩43,800

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

제품 속성	속성 값	속성 선택
제조업체:	Mikroe
제품 카테고리:	LED 조명 개발 툴
RoHS:
제품:	Add-On Boards
브랜드:	Mikroe
최고 작동온도:	+ 120 C
최저 작동온도:	- 40 C
출력 전류:	150 mA
제품 유형:	LED Lighting Development Tools
팩토리 팩 수량:	1
하위 범주:	Development Tools

제품을 찾음:

유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.

이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.

속성 선택됨: 0

UK & EU Declaration of Conformity (PDF)

USHTS:: 8537109170
JPHTS:: 853710000
ECCN:: EAR99

Display Click Boards

Mikroe Display Click Boards allow for adding LCD, OLED, and various other display options for applications and designs. Mikroe Click Boards are based around the mikroBUS™ interface standard and easily add incredible system capabilities. The devices are ideal for any application where a display is needed.

LED Driver 13 Click

Mikroe LED Driver 13 Click simplifies the control of multiple LEDs and features the Allegro Microsystems A80604-1 4-channel LED driver. The driver is designed at a switching frequency of 400kHz that provides 150mA per channel. It's powered by an external power supply in the range of 6V to 18V, providing an output voltage of approximately 26V, which is used to power LEDs connected to LED channels. On the logical side, this board uses both 3V3 and 5V with mikroBUS™ power rails and communicates with the MCU via GPIO pins. In addition, the option of analog or digital LED dimming selection is given using a PWM pin from the mikroBUS™ socket or via an onboard potentiometer/external PWM signal.

31FL323x LED Lighting Development Boards

ISSI 31FL323x LED Lighting Development Boards are development tools that evaluate ISSI multi-channel LED drivers. LED drivers are electrical circuits used to power light-emitting diodes. The fully assembled and tested board is powered by the Arm® Cortex®-M3 or 80C51 (IS31FL3235A-QFLS2-EB) with a 5V operating supply voltage. The evaluation boards have multiple display modes.

IS31LT3360 Demonstration Board

ISSI IS31LT3360 Demonstration Board is a fully assembled and tested PCB that uses the IS31LT3360 continuous mode inductive step-down converter. This ISSI board is designed to drive single or multiple series connected LEDs. This performance is achieved efficiently from a voltage source higher than the LED voltage.