MIKROE-4977

Name: Mikroe MIKROE-4977
Brand: Mikroe
SKU: 932-MIKROE-4977
Price: 32120 KRW
Availability: InStock

이미지는 참조용으로만 사용하십시오
제품 사양을 참조하세요

Mouser 번호:

932-MIKROE-4977

제조업체 번호:

MIKROE-4977

제조업체:

Mikroe

설명:

LED 조명 개발 툴 LED Driver 12 Click

추가 정보

Mikroe MIKROE-4977에 대해 자세히 알아보십시오.

재고 상태: 7

재고:: 7 즉시 배송 가능

예기치 않은 오류가 발생했습니다. 나중에 다시 시도하십시오.

수량 입력:

최소: 1 배수: 1

단가:

₩-

합계:

₩-

예상 관세:

가격 (KRW)

수량	단가	합계
	₩32,120	₩32,120

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

제품 속성	속성 값	속성 선택
제조업체:	Mikroe
제품 카테고리:	LED 조명 개발 툴
RoHS:
제품:	Add-On Boards
작동 공급 전압:	3.3 V to 5 V
브랜드:	Mikroe
최고 작동온도:	+ 85 C
최저 작동온도:	- 40 C
출력 전류:	25 mA
제품 유형:	LED Lighting Development Tools
팩토리 팩 수량:	1
하위 범주:	Development Tools

제품을 찾음:

유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.

이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.

속성 선택됨: 0

UK & EU Declaration of Conformity (PDF)

USHTS:: 8537109170
ECCN:: EAR99

Display Click Boards

Mikroe Display Click Boards allow for adding LCD, OLED, and various other display options for applications and designs. Mikroe Click Boards are based around the mikroBUS™ interface standard and easily add incredible system capabilities. The devices are ideal for any application where a display is needed.

31FL323x LED Lighting Development Boards

ISSI 31FL323x LED Lighting Development Boards are development tools that evaluate ISSI multi-channel LED drivers. LED drivers are electrical circuits used to power light-emitting diodes. The fully assembled and tested board is powered by the Arm® Cortex®-M3 or 80C51 (IS31FL3235A-QFLS2-EB) with a 5V operating supply voltage. The evaluation boards have multiple display modes.

IS31LT3360 Demonstration Board

ISSI IS31LT3360 Demonstration Board is a fully assembled and tested PCB that uses the IS31LT3360 continuous mode inductive step-down converter. This ISSI board is designed to drive single or multiple series connected LEDs. This performance is achieved efficiently from a voltage source higher than the LED voltage.

LED Driver 12 Click

Mikroe LED Driver 12 Click features the NXP Semiconductors PCA9532 16-bit I²C-configurable I/O expander optimized for dimming LEDs. The PCA9532 offers high efficiency, supporting up to 16 LED channels. It delivers a maximum of up to 25mA of LED current per channel. It contains an internal oscillator with two user-programmable blink rates and duty cycles coupled to the output PWM. Any bits not used for controlling the LEDs can be used for GPIO expansion, which provides a simple solution when additional I/O is needed for some sensors, push-buttons, or alarm monitoring.