MIKROE-4787

Name: Mikroe MIKROE-4787
Brand: Mikroe
SKU: 932-MIKROE-4787
Price: 27740 KRW
Availability: InStock

이미지는 참조용으로만 사용하십시오
제품 사양을 참조하세요

Mouser 번호:

932-MIKROE-4787

제조업체 번호:

MIKROE-4787

제조업체:

Mikroe

설명:

LED 조명 개발 툴 LED Driver 10 Click

추가 정보

Mikroe MIKROE-4787에 대해 자세히 알아보십시오.

재고 상태: 6

재고:: 6 즉시 배송 가능

예기치 않은 오류가 발생했습니다. 나중에 다시 시도하십시오.

수량 입력:

최소: 1 배수: 1

단가:

₩-

합계:

₩-

예상 관세:

가격 (KRW)

수량	단가	합계
	₩27,740	₩27,740

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

제품 속성	속성 값	속성 선택
제조업체:	Mikroe
제품 카테고리:	LED 조명 개발 툴
RoHS:
제품:	Add-On Boards
연동 사용 대상:	LED Status Signalization
작동 공급 전압:	3.3 V to 5 V
브랜드:	Mikroe
최고 작동온도:	+ 85 C
최저 작동온도:	- 40 C
출력 전류:	45 mA
제품 유형:	LED Lighting Development Tools
팩토리 팩 수량:	1
하위 범주:	Development Tools
단위 중량:	26 g

제품을 찾음:

유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.

이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.

속성 선택됨: 0

UK & EU Declaration of Conformity (PDF)

USHTS:: 8473302000
ECCN:: EAR99

LED Driver 10 Click

Mikroe LED Driver 10 Click simplifies the control of multiple LEDs, and features the Texas Instruments TLC59283 16-channel light-emitting diode (LED) driver. Each LED channel is individually controlled with a simple SPI serial communication protocol compatible with 3.3V or 5V logic levels. Each constant-current output has a pre-charge field-effect transistor that can reduce ghosting on the multiplexing drive LED display. It has additional features like switching off all outputs via just one mikroBUS™ pin and setting the constant-current values on all 16 channels via one onboard potentiometer.

31FL323x LED Lighting Development Boards

ISSI 31FL323x LED Lighting Development Boards are development tools that evaluate ISSI multi-channel LED drivers. LED drivers are electrical circuits used to power light-emitting diodes. The fully assembled and tested board is powered by the Arm® Cortex®-M3 or 80C51 (IS31FL3235A-QFLS2-EB) with a 5V operating supply voltage. The evaluation boards have multiple display modes.

IS31LT3360 Demonstration Board

ISSI IS31LT3360 Demonstration Board is a fully assembled and tested PCB that uses the IS31LT3360 continuous mode inductive step-down converter. This ISSI board is designed to drive single or multiple series connected LEDs. This performance is achieved efficiently from a voltage source higher than the LED voltage.