KITXMCLEDDALI20RGBTOBO1

Infineon Technologies
726-KXMCLEDDALI20RGB
KITXMCLEDDALI20RGBTOBO1

제조업체:

설명:
LED 조명 개발 툴 The XMC 3 channels RGB LED Lighting Shield from Infineon technologies is one of the first intelligent evaluation boards compatible with Arduino as well as Infineon s XMC1100 BOOT KIT. It is designed to be easily configurable and combinable for diffe

재고 상태: 2

재고:
2 즉시 배송 가능
최소: 1   배수: 1
단가:
₩-
합계:
₩-
예상 관세:
본 제품의 배송비는 무료

가격 (KRW)

수량 단가
합계
₩155,008.2 ₩155,008

제품 속성 속성 값 속성 선택
Infineon
제품 카테고리: LED 조명 개발 툴
RoHS:  
Evaluation Boards
Arduino
ARM
12 V to 48 V
Bulk
브랜드: Infineon Technologies
제품 유형: LED Lighting Development Tools
팩토리 팩 수량: 1
하위 범주: Development Tools
부품번호 별칭: KIT_XMC_LED_DALI_20_RGB SP005324196
단위 중량: 46.050 g
제품을 찾음:
유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
속성 선택됨: 0

CAHTS:
8543700000
USHTS:
8543709860
JPHTS:
854370000
ECCN:
3A991.a.2

31FL323x LED Lighting Development Boards

ISSI 31FL323x LED Lighting Development Boards are development tools that evaluate ISSI multi-channel LED drivers. LED drivers are electrical circuits used to power light-emitting diodes. The fully assembled and tested board is powered by the Arm® Cortex®-M3 or 80C51 (IS31FL3235A-QFLS2-EB) with a 5V operating supply voltage. The evaluation boards have multiple display modes.

개발 도구

Infineon Development Tools offer a wide selection to enable the engineer's unique design, regardless of the target application. These range from LED lighting, power management, sensors, analog & digital ICs, communication, optoelectronic, and embedded development tools.
Learn More

IS31LT3360 Demonstration Board

ISSI IS31LT3360 Demonstration Board is a fully assembled and tested PCB that uses the IS31LT3360 continuous mode inductive step-down converter. This ISSI board is designed to drive single or multiple series connected LEDs. This performance is achieved efficiently from a voltage source higher than the LED voltage.

KIT_XMC_LED_DALI_20_RGB LED 조명 쉴드

Infineon Technologies KIT_XMC_LED_DALI_20_RGB LED 조명 쉴드는 Arduino 및 Infineon의 XMC1100 BOOT KIT와 호환됩니다. 이 쉴드는 다양한 LED 조명 엔진과 램프를 위해 설계되었으며 LED 조명 애플리케이션의 빠른 프로토타이핑 및 저렴한 평가를 위해 설계되었습니다.XMC1302가 장착된 RGB LED 조명 쉴드는 DC/DC 벅 토폴로지를 사용하며 정전류로 최대 3개의 LED 채널을 구동할 수 있습니다.