4431

Adafruit
485-4431
4431

제조업체:

설명:
Adafruit 액세서리 STEMMA Wired Tactile Push-Button Pack - 5 Color Pack

ECAD 모델:
무료 라이브러리 로더를 다운로드하여 이 파일을 ECAD 도구용으로 변환하십시오. ECAD 모델에 대해 자세히 알아보기

제품 속성 속성 값 속성 선택
Adafruit
제품 카테고리: Adafruit 액세서리
RoHS:  
Electromechanicals
STEMMA Wired Tactile Push-Button Pack - 5 Color
브랜드: Adafruit
설명/기능: STEMMA Wired Tactile Push-Button Pack - 5 Color
제품 유형: Accessories
시리즈: STEMMA
팩토리 팩 수량: 1
하위 범주: Supplies
단위 중량: 68.375 g
제품을 찾음:
유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
속성 선택됨: 0

규정 준수 코드
KRHTS:
8536502000
USHTS:
8536509031
ECCN:
EAR99
원산지 분류
COO(원산지):
중국
어셈블리 원산지:
불가능
COD(확산 공정 국가):
불가능
배송 시 국가는 변경될 수 있습니다.

STEMMA Wired Tactile Push-Button Pack

Adafruit STEMMA Wired Tactile Push-Button Pack is a colorful round tactile button switch assembled onto a PCB. Each switch comes with a candy-colored round cap snapped on and has a pull-up resistor installed. The Adafruit pack comes with one of each color of caps (blue, white, yellow, red, and black). The pins are normally open (disconnected), and when the button is pressed, the pins are momentarily closed. Each push-button board has a JST-PH 2mm connector and a matching JST PH 3-Pin to male header cable (200mm) to make wiring easy. The user plugs the cable in and then uses the black wire to connect to a microcontroller/microcomputer ground. The white wire is connected to the input signal pin. The red wire can be connected to the power pin (3V or 5V) if the user wants to activate the pull-up resistor.

재고 상태: 52

재고:
52 즉시 배송 가능
공장 리드 타임:
1주 표시된 것보다 많은 수량에 대한 추정 공장 생산 시간입니다.
최소: 1   배수: 1
단가:
₩-
합계:
₩-
예상 관세:

가격 (KRW)

수량 단가
합계
₩11,700 ₩11,700