IS32LT3965-QWCLA3-TR

Lumissil
870-32LT3965QWCLA3TR
IS32LT3965-QWCLA3-TR

제조업체:

설명:
LED 조명 드라이버 IC 1.5-AMPERE PWM DIMMABLE SYNCHRONOUS BUCK LED DRIVER WITH LED THERMAL PROTECTION AND FAULT REPORTING, WFCQFN-14, (3mm4mm), T&R

ECAD 모델:
무료 라이브러리 로더를 다운로드하여 이 파일을 ECAD 도구용으로 변환하십시오. ECAD 모델에 대해 자세히 알아보기

구매 가능 정보

재고:
재고 없음
공장 리드 타임:
26 주 추정 공장 생산 시간입니다.
이 제품은 리드 타임이 깁니다.
최소: 1   배수: 1
단가:
₩-
합계:
₩-
예상 관세:

가격 (KRW)

수량 단가
합계
₩2,767.6 ₩2,768
₩2,042.4 ₩20,424
₩1,864.8 ₩46,620
₩1,657.6 ₩165,760
₩1,554 ₩388,500
₩1,509.6 ₩754,800
₩1,448.9 ₩1,448,900
전체 릴(2500의 배수로 주문)
₩1,447.4 ₩3,618,500

제품 속성 속성 값 속성 선택
Lumissil
제품 카테고리: LED 조명 드라이버 IC
1 Output
Buck
20 mA
WFCQFN-14
38 V
3.8 V
200 kHz
5 V
- 40 C
+ 150 C
Reel
Cut Tape
브랜드: Lumissil
디밍: PWM
입력 전압: 3.8 V to 38 V
장착 스타일: SMD/SMT
채널 수: 1 Channel
Pd - 전력 발산: 2.33 W
제품: LED Drivers
제품 유형: LED Lighting Drivers
팩토리 팩 수량: 2500
하위 범주: Driver ICs
공급 전류 - 최대: 1 mA
제품을 찾음:
유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
속성 선택됨: 0

USHTS:
8542390090
TARIC:
8542399000
ECCN:
EAR99

IS32LT3965 Synchronous Buck LED Driver

Lumissil IS32LT3965 Synchronous Buck LED Driver integrates high-side and low-side N-channel MOSFETs to operate in a buck configuration. This LED driver provides a constant current of up to 1.5A for driving single or multiple-series connected LEDs. The IS32LT3965 driver operates from a 3.8V to 38V input voltage range and a -40°C to 125°C temperature range. This LED driver operates up to 2.2MHz in fixed frequency mode during switching. The external resistor connected between the VCC and TON pins configures the on-time (switching frequency).

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.