IFX9201SGAUMA1

Infineon Technologies
726-IFX9201SGAUMA1
IFX9201SGAUMA1

제조업체:

설명:
모터 / 모션 / 점화 컨트롤러 및 드라이버 DC_MOTOR_CONTROL

ECAD 모델:
무료 라이브러리 로더를 다운로드하여 이 파일을 ECAD 도구용으로 변환하십시오. ECAD 모델에 대해 자세히 알아보기

재고 상태: 2,014

재고:
2,014
즉시 배송 가능
주문 중:
3,000
예상 2026-02-23
1,000
미정
공장 리드 타임:
20
표시된 것보다 많은 수량에 대한 추정 공장 생산 시간입니다.
이 제품은 리드 타임이 깁니다.
최소: 1   배수: 1
단가:
₩-
합계:
₩-
예상 관세:
포장:
전체 릴(1000의 배수로 주문)

가격 (KRW)

수량 단가
합계
컷 테이프/MouseReel™
₩7,373 ₩7,373
₩4,920.2 ₩49,202
₩4,569.8 ₩114,245
₩4,000.4 ₩400,040
₩3,796 ₩949,000
₩3,416.4 ₩1,708,200
전체 릴(1000의 배수로 주문)
₩2,876.2 ₩2,876,200
₩2,788.6 ₩5,577,200
₩2,730.2 ₩13,651,000
† ₩8,000 MouseReel™ 수수료는 장바구니에 더해져 계산됩니다. 모든 MouseReel™ 주문은 취소 및 환불이 불가능합니다.

제품 속성 속성 값 속성 선택
Infineon
제품 카테고리: 모터 / 모션 / 점화 컨트롤러 및 드라이버
RoHS:  
REACH - SVHC:
Brushed DC Motor Drivers
Half Bridge
6 A
5 mA
- 40 C
+ 125 C
SMD/SMT
SOIC-12
Reel
Cut Tape
MouseReel
브랜드: Infineon Technologies
습도에 민감: Yes
출력 수: 2 Output
작동 주파수: 20 kHz
제품 유형: Motor / Motion / Ignition Controllers & Drivers
팩토리 팩 수량: 1000
하위 범주: PMIC - Power Management ICs
공급 전압 - 최대: 36 V
공급 전압 - 최소: 4.5 V
부품번호 별칭: IFX9201SG SP001281886
단위 중량: 1 g
제품을 찾음:
유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
속성 선택됨: 0

이 기능을 활성화하려면 자바스크립트가 필요합니다.

CNHTS:
8542391090
CAHTS:
8542390000
USHTS:
8542310030
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

IFX9201SG 통합 H-Bridge 드라이버

Infineon IFX9201SG Integrated H-Bridge Driver is a general purpose 6A H-bridge that can be used for many applications designed for the control of small DC motors and inductive loads. The outputs can be pulse width modulated at frequencies up to 20kHz. This enables operation above the human sonic range - by means of PWM/DIR control. While the signal at the direction input defines the direction of the DC motor, the PWM signal controls the duty cycle. For load currents above the current limitation threshold (7A typ.) the H-Bridge switches into chopper current limitation mode. The device is protected against short circuits and over temperature and provides diagnosis via SPI or basic error feedback via status flag. Open load can be detected when the bridge is disabled or during PWM operation of inductive loads.
Learn More