FAN53555UC04X

onsemi
512-FAN53555UC04X
FAN53555UC04X

제조업체:

설명:
스위칭 전압 조정기 5A, 2.4MHZ DIGTLY PRGRMMABLE REGULATOR

ECAD 모델:
무료 라이브러리 로더를 다운로드하여 이 파일을 ECAD 도구용으로 변환하십시오. ECAD 모델에 대해 자세히 알아보기

재고 상태: 1,279

재고:
1,279 즉시 배송 가능
공장 리드 타임:
16 주 표시된 것보다 많은 수량에 대한 추정 공장 생산 시간입니다.
1279을(를) 초과하는 수량에 대해서는 최소 주문 요구사항이 적용됩니다.
최소: 1   배수: 1
단가:
₩-
합계:
₩-
예상 관세:
포장:
전체 릴(3000의 배수로 주문)

가격 (KRW)

수량 단가
합계
컷 테이프/MouseReel™
₩1,503.8 ₩1,504
₩1,080.4 ₩10,804
₩975.3 ₩24,383
₩859.9 ₩85,990
₩805.9 ₩201,475
₩772.3 ₩386,150
₩727.1 ₩727,100
전체 릴(3000의 배수로 주문)
₩709.6 ₩2,128,800
₩687.7 ₩4,126,200
† ₩8,000 MouseReel™ 수수료는 장바구니에 더해져 계산됩니다. 모든 MouseReel™ 주문은 취소 및 환불이 불가능합니다.

제품 속성 속성 값 속성 선택
onsemi
제품 카테고리: 스위칭 전압 조정기
RoHS:  
SMD/SMT
WLCSP-20
Buck
603 mV to 1.411 V
5 A
1 Output
2.5 V
5.5 V
55 uA
2.4 MHz
- 40 C
+ 85 C
FAN53555
Reel
Cut Tape
MouseReel
브랜드: onsemi
입력 전압: 2.5 V to 5.5 V
부하 조정: - 0.1 %/A
제품 유형: Switching Voltage Regulators
차단: Shutdown
팩토리 팩 수량: 3000
하위 범주: PMIC - Power Management ICs
공급 전압 - 최소: 2.5 V
타입: Digitally Programmable TinyBuck Regulator
단위 중량: 73 mg
제품을 찾음:
유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
속성 선택됨: 0

KRHTS:
8542311000
CNHTS:
8542399000
CAHTS:
8542310000
USHTS:
8542390090
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99

FAN53555 Digitally Programmable PoL Regulators

onsemi / Fairchild FAN53555 Digitally Programmable High-Efficiency Point of Load Regulators is a step-down switching voltage regulator that delivers a digitally programmable output from an input voltage supply of 2.5V to 5.5V. The output voltage is programmed through an I2C interface capable of operating up to 3.4MHz. Using a proprietary architecture with synchronous rectification, the FAN53555 is capable of delivering 5A continuous at over 80% efficiency, while maintaining over 80% efficiency at load currents as low as 10mA. Pulse currents as high as 6.5A can be supported by the 05 option. The onsemi / Fairchild regulator operates at a nominal fixed frequency of 2.4MHz, which reduces the value of the external components to 330nH for the output induction and as low as 20µF for the output capacitor. Additional output capacitance can be added to improve regulation during load transients without affecting stability. The inductance of up to 1.2µH may be used with additional output capacitance.