GRF6403

Guerrilla RF
459-GRF6403
GRF6403

제조업체:

설명:
감쇠기 31.75 dB RANGE / 0.25dB STEP DSA; 0.05 - 6 GHz; Bi-directional, 31.75 dB range digital step attenuator featuring Rapid Fire selection pin

데이터시트:
ECAD 모델:
무료 라이브러리 로더를 다운로드하여 이 파일을 ECAD 도구용으로 변환하십시오. ECAD 모델에 대해 자세히 알아보기

재고 상태: 4,963

재고:
4,963 즉시 배송 가능
최소: 1   배수: 1
단가:
₩-
합계:
₩-
예상 관세:
포장:
전체 릴(1500의 배수로 주문)

가격 (KRW)

수량 단가
합계
컷 테이프/MouseReel™
₩11,037.6 ₩11,038
₩8,468 ₩84,680
₩7,884 ₩197,100
₩6,935 ₩693,500
₩6,584.6 ₩1,646,150
₩5,913 ₩2,956,500
₩4,978.6 ₩4,978,600
전체 릴(1500의 배수로 주문)
₩4,745 ₩7,117,500
† ₩8,000 MouseReel™ 수수료는 장바구니에 더해져 계산됩니다. 모든 MouseReel™ 주문은 취소 및 환불이 불가능합니다.

제품 속성 속성 값 속성 선택
Guerrilla RF
제품 카테고리: 감쇠기
QFN-24
31.75 dB
6 GHz
50 Ohms
7 bit
2 Channel
0.25 dB
브랜드: Guerrilla RF
삽입 손실: 2.5 dB
최고 작동온도: + 115 C
최소 주파수: 50 MHz
최저 작동온도: - 40 C
장착 스타일: SMD/SMT
작동 공급 전압: 3.3 V, 5 V
포장: Reel
포장: Cut Tape
포장: MouseReel
제품 유형: Attenuators
시리즈: GRF6403
팩토리 팩 수량: 1500
하위 범주: Wireless & RF Integrated Circuits
기술: Si
타입: Digital Step
표준 감쇠: 31.75 dB
제품을 찾음:
유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
속성 선택됨: 0

이 기능을 활성화하려면 자바스크립트가 필요합니다.

CNHTS:
8542399000
USHTS:
8542390090
MXHTS:
8542399999
ECCN:
EAR99

GRF5611 High Linearity Power Amplifier

Guerrilla RF GRF5611 High Linearity Power Amplifier is a high-gain, two-stage InGaP HBT power amplifier designed to deliver excellent P1dB, ACLR, and IM3 performance over the 902MHz to 960MHz band. Exceptional native linearity makes the amplifier ideal for transmitter applications that typically do not employ digital pre-distortion correction schemes. The 3mm x 3mm QFN packaged GRF5611 features a rugged design and operates within a -40°C to +85°C temperature range.

GRF640x Digital Step Attenuators

Guerrilla RF GRF640x Digital Step Attenuators (DSAs) feature a RAPID FIRE® hybrid control mechanism that combines the speed of parallel programming with the simplicity and convenience of a single control line. The GRF640x DSA family utilizes two dedicated registers to store separate attenuation states. Toggling the RFA bit allows the DSA to switch between the primary and secondary states quickly. This fast switching circumvents the delays commonly associated with serial programming. Depending on the SPI clock rate, these delays can be as long as 1600ns. To match the RFA switching speeds, traditional DSAs must utilize parallel programming modes with seven dedicated control lines. This additional I/O not only requires larger packaging but also complicates signal routing.