NFC/RFID 태그 및 트랜스폰더 This is a simple thumbnail-size RFID tag. These tags are great for sensing presence identification etc. and they're small so they can be easily sewn into clothing or inserted into enclosures. Each tag comes with a unique 32-bit ID code and is no

스크류드라이버, 너트 드라이버 및 소켓 드라이버 This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.

라즈베리 파이 액세서리 This 2x20 shrouded header has the same number and spacing of pins as a Raspberry Pi so you can easily connect via ribbon cable to the low-level peripherals and get hacking! This through-hole header has 40 0.1"-spaced pins and is keyed for polarity.Ch

NFC/RFID 태그 및 트랜스폰더 This is a basic RFID tag that functions within the MIFARE Classic 1K guidelines. You can use these for all sorts of identification and sensing applications. The tag also has 1K of data storage which can be read and written from a compatible device.

스크류드라이버, 너트 드라이버 및 소켓 드라이버 What should every hacker have available to them? That's right a screwdriver (you have to get into those cases somehow). What makes screwdrivers even better is when there are a variety of interchangeable bits to use in different situations as you nee

안테나 액세서리 Many magnetic mount GPS antennas rely on being mounted on a car or other large metallic object to provide a good ground plane. But what if you want to use an antenna not on a car? The GPS Antenna Ground Plate is the solution! This plate significantly

RF 개발 툴 Looking for a low-cost way to send and receive data messages via satellite? This is it! With a clear view of the sky the Swarm M138 Satellite Transceiver allows you to send and receive short messages. It works anywhere in the world including the po

테스트 클립 IC Test Clip SOIC 8-Pin

USB 커넥터 The Raspberry Pi Micro USB to USB-C Adapter is a small adapter that allows a male Micro-B USB power adapter the ability to power devices with a female USB Type C port specifically the Raspberry Pi 4. This adapter is perfect for those looking to powe

SparkFun 액세서리 Graphic Equalizer Display Filter

SparkFun 액세서리 This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of th

교육용 로봇 키트 This is the Wheel Encoder Kit from DAGU a simple add-on to any wheeled robot that can help measure the speed or distance the chassis travels. Each wheel encoder kit consists of two neodymium 8-pole magnets with rubber hubs and two hall-effect sensor