TPS65136RTERG4

595-TPS65136RTERG4
TPS65136RTERG4

제조업체:

설명:
LED 조명 드라이버 IC Dual Pos & Neg Output Reg

라이프사이클:
폐기됨
ECAD 모델:
무료 라이브러리 로더를 다운로드하여 이 파일을 ECAD 도구용으로 변환하십시오. ECAD 모델에 대해 자세히 알아보기
현재 Mouser는 귀하의 거주 지역에서는 이 제품을 판매하지 않습니다.

구매 가능 정보

재고:

대체 포장

제조업체 부품 번호:
포장:
Reel, Cut Tape, MouseReel
구매 가능 정보:
재고 상태
가격:
₩3,019
최소:
1

유사 제품

Texas Instruments TPS65136RTER
Texas Instruments
LED 조명 드라이버 IC Dual Pos and Neg Out put Reg

제품 속성 속성 값 속성 선택
Texas Instruments
제품 카테고리: LED 조명 드라이버 IC
배송 제한사항:
 현재 Mouser는 귀하의 거주 지역에서는 이 제품을 판매하지 않습니다.
RoHS:  
2 Output
WQFN-16
5.5 V
2.3 V
TPS65136
- 40 C
+ 85 C
Reel
Cut Tape
MouseReel
브랜드: Texas Instruments
개발 키트: TPS65136EVM-265
입력 전압: 2.3 V to 5.5 V
습도에 민감: Yes
장착 스타일: SMD/SMT
채널 수: 2 Channel
제품 유형: LED Lighting Drivers
팩토리 팩 수량: 3000
하위 범주: Driver ICs
타입: AMOLED Bias
제품을 찾음:
유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.
속성 선택됨: 0

                        
The G4 and E4 suffixes were added for ROHS conversion. The
G4 and E4 parts are exactly the same as the original parts
without the G4 or E4 suffix.

For lead-frame-based devices, the RoHS-compliant solution
is backward-compatible with lead-based processes; so the
same part is shipped regardless of whether a unique part
number or a standard part number is ordered.

Lead-frame-based unique part numbers will consist of the
standard part number plus a two-character suffix (usually
E4 or G4, sometimes E3, E6, G3 or G6).

"E" = RoHS-compliant

"G" = Green (RoHS-compliant and no Br/Sb)

Please contact a Mouser Technical Sales Representative for
further information.


5-1011-9

이 기능을 활성화하려면 자바스크립트가 필요합니다.

CNHTS:
8542319000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
8542390990
TARIC:
8542399000
MXHTS:
85423999
ECCN:
EAR99

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

Medical Pulse Oximeter Backlight