브라우저에서 자바스크립트를 사용하지 않도록 설정한 것으로 보입니다. 로그인하지 않으면 이 페이지의 일부 기능이 작동하지 않습니다.

PTSLR12066V400

Name: Eaton PTSLR12066V400
Brand: Eaton Electronics
SKU: 504-PTSLR12066V400
Price: 991 KRW
Availability: InStock

이미지는 참조용으로만 사용하십시오
제품 사양을 참조하세요

Mouser 번호:

504-PTSLR12066V400

제조업체 번호:

PTSLR12066V400

제조업체:

Eaton Electronics

설명:

재복구 퓨즈 - PPTC 6V 4.0A-HD 50A MAX

데이터시트:

PTSLR12066V400 데이터시트 (PDF)

ECAD 모델:

무료 라이브러리 로더를 다운로드하여 이 파일을 ECAD 도구용으로 변환하십시오. ECAD 모델에 대해 자세히 알아보기

추가 정보

Eaton Electronics PTSLR12066V400에 대해 자세히 알아보십시오.

재고 상태: 2,727

재고:: 2,727 즉시 배송 가능

예기치 않은 오류가 발생했습니다. 나중에 다시 시도하십시오.
공장 리드 타임:: 19 주 표시된 것보다 많은 수량에 대한 추정 공장 생산 시간입니다.

수량 입력:

최소: 1 배수: 1

단가:

₩-

합계:

₩-

예상 관세:

포장:

전체 릴(2500의 배수로 주문)

컷 테이프

MouseReel™ (+₩8,000)

가격 (KRW)

수량	단가	합계
컷 테이프/MouseReel™ ^†
	₩991.6	₩992
	₩911.7	₩9,117
	₩757.8	₩37,890
	₩698.6	₩69,860
	₩627.5	₩156,875
	₩580.2	₩290,100
	₩534.3	₩534,300
전체 릴(2500의 배수로 주문)
	₩442.5	₩1,106,250

† ₩8,000 MouseReel™ 수수료는 장바구니에 더해져 계산됩니다. 모든 MouseReel™ 주문은 취소 및 환불이 불가능합니다. ↩

.hidden-for-nojs { display: none; } .pull-right-nojs { justify-content: flex-end; }

제품 속성	속성 값	속성 선택
제조업체:	Eaton
제품 카테고리:	재복구 퓨즈 - PPTC
RoHS:
시리즈:	PTSLR
장착 스타일:	SMD/SMT
종단 스타일:	SMD/SMT
홀드 전류:	4 A
최대 전압:	6 VDC
트립 전류:	8 A
전류 정격 - 최대:	50 A
저항:	14 mOhms
패키지/케이스:	1206 (3216 metric)
최저 작동온도:	- 40 C
최고 작동온도:	+ 85 C
포장:	Reel
포장:	Cut Tape
포장:	MouseReel
브랜드:	Eaton Electronics
COA(최종 조립 국가):	Not Available
COD(확산 공정 국가):	Not Available
COO(원산지):	CN
높이:	1.2 mm
길이:	3.5 mm
습도에 민감:	Yes
Pd - 전력 발산:	800 mW
제품 유형:	Resettable Fuses - PPTC
팩토리 팩 수량:	2500
하위 범주:	PPTC Resettable Fuses
너비:	1.8 mm
단위 중량:	5 g

제품을 찾음:

유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.

이 카테고리에 유사 제품을 표시하려면 확인란을 하나 이상 선택하십시오.

속성 선택됨: 0

문서 필터:

데이터시트

PTSLR12066V400 데이터시트 (PDF)

Design Tools

EATON Automotive Tool

이 기능을 활성화하려면 자바스크립트가 필요합니다.

CNHTS:: 8533400000
CAHTS:: 8533400000
USHTS:: 8533408070
JPHTS:: 853340000
ECCN:: EAR99

Fuses & Fuse Holders

Bussmann / Eaton Fuses and Fuse Holders are designed to provide overcurrent protection against harmful surges that cause critical damage. These fuses are offered in various sizes and are suitable for a wide range of applications, including automotive, power conversion, EV charging stations, industrial control panels, and material handling systems. Bussmann / Eaton Fuses and Fuse Holders provide various mounting options and configurations, ensuring an ideal solution can be found for any project.

PTSLR PTC Resettable Fuses

Eaton Electronics PTSLR PTC Resettable Fuses provide overcurrent and overtemperature protection in various applications and come in 0805, 1206, 1210, and 1812 chip sizes. PTSLR PTC Resettable Fuses offer hold currents from 0.75A to 5A and can interrupt fault currents up to 50A at maximum rated voltage. During fault conditions, these fuses offer a high resistance to prevent current from flowing in the circuit until the cause of the fault is removed and the device cools. Unlike one-time fuses, PTSLR fuses do not need to be replaced immediately after a trip. PTSLR fuses offer lower initial resistance than other PTC fuses (as low as 1mΩ), which helps improve power loss across the device in normal operation. PTSLR fuses are ideal for rechargeable battery packs, USB ports, and small DC motors.

Battery Management Systems

Eaton provides a wide portfolio of products for Battery Management Systems (BMS), including terminal blocks, fuses, supercapacitors, chokes, inductors, and more. Battery Management Systems monitor individual cells, system voltage, current, and temperature. When monitoring individual cells, the BMS balances voltages and regulates the current flow, and if the upper or lower voltage, current, or temperature limit is exceeded, the BMS temporarily disconnects the load or source. Eaton Battery Management Systems estimate the State of Health (SoH), State of Charge (SoC), State of Energy (SoE), and State of Power (SoP) in batteries.

PTC Resettable Fuses

Eaton PTC Resettable Fuses are designed to protect sensitive components from overcurrent and overtemperature conditions that can occur due to power surges, electrical transients, high ambient temperatures, and more. The PTC fuses are based on a unique positive coefficient material whose internal resistance increases exponentially due to overcurrent conditions and higher temperatures. High resistance offered by the fuse during a trip prevents current from flowing through the circuit until the fault current/over-temperature source is removed and falls below the design current/temperature limit. Once the fault current is removed or the ambient temperature cools, the fuse re-enters its conducting state, allowing the current to flow through the circuit again. These components ensure constant uptime in applications where using one-time fuses would be impractical or expensive, including battery-powered devices, industrial controllers, medical devices, and I/O ports of consumer electronics.